3.Advantages and Features 3.1. The trough roller has the characteristics of corrosion resistance: acid, alkali and salt are difficult to corrode it.
3.2. The trough roller has strong hardness: strong abrasion resistance.
3.3. Good airtightness: the trough roller is fully sealed, with plastic labyrinth seals at both ends, oil and grease will not leak, which can keep the rolling shaft for a long time; the trough roller is running in a fully sealed state.
3.4. Ceramic surface of trough roller: an oxide film is formed, the surface is smooth, does not adhere to materials, and the friction coefficient in contact with the conveyor belt is small, which reduces the driving force of the winch.
3.5. The trough roller has a long service life: the trough roller is 2-5 times longer than the steel roller, and it can reduce belt wear, the belt does not run off, and the belt service life is prolonged.
3.6. Low operating cost: trough rollers can reduce the overall cost of belt conveyors and reduce maintenance man-hours.
4. Packing Details:
4.1, Outer packing is plywood case, which is up to the international standards.
4.2, Inner packing is Moisture-proof and water-proof membrane.
4.3, All of package are wrapped by 0.5mm steel belt to further strengthen. 5. Maintenance and repair
5.1 under normal conditions, the conveyor is required to start without load and avoid short-time starting.
5.2 it is necessary to check whether there is oil leakage in the reducer regularly, and whether the regular oil filling volume is in conformity with the construction in time
Correct and supplement.
5.3 if there is squeal at the driving drum, it means that the belt is slipping. Check whether the belt is tensioned.
5.4 the belt joint shall be inspected frequently, and the damaged parts shall be cut and redone in time, and the damaged parts shall be protected during redoing
6.Tech data
